The range comprises three PH10 PLUS models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features. This enables the inspection of features at different angles without the need for frequent, time consuming stylus cluster changes. All three variants of the PH10 PLUS heads are supplied with a repeatability specification of just 0.4 µm (2σ) (specified at a distance of 100 mm), giving users improved positioning at the stylus tip.

PH10M PLUS shank-mounted and PH10MQ quill-mounted heads with multiwired probe capability and a Renishaw autojoint

PH10M PLUS and PH10MQ PLUSThe PH10M PLUS and PH10MQ PLUS are motorised indexing heads that re-orientate the probe repeatably to any one of 720 positions at 7.5° increments

Autojoint mount for repeatable probe positioning

Torque capable of lifting a 300 mm (11.81 in) long extension bar

Full multiwire capability for probes such as TP7M and SP25M

Rapid automatic probe interchange via ACR1 or ACR3

AM1 for PH10M PLUS and AM2 for PH10MQ PLUS adjustment modules for aligning the probe head to machine

PH10MQ PLUS fits inside the quill for a neater and shorter probe mount

Accuracy

Repeatability specification is a market leading 0.4 μm at a 100 mm radius from the centre of rotation of the axis, providing accurate positioning even when using long extensions.

Increased throughput

The PH10’s ability to index automatically reduces the number of stylus changes required, thereby increasing the throughput of your CMM. Indexing is faster than stylus changing.

Increased reach and flexibility

Extension bars up to 450 mm long, together with the full range of Renishaw autojoint and M8 probes, can be used with the appropriate head types.

Repeatable kinematic location

The PH10 PLUS uses a six point kinematic location for each of its 720 indexable positions, making its locking mechanism the most repeatable on the market.

The Renishaw autojoint

This industry standard feature allows repeatable automated probe exchange without the need for stylus requalification.

UCC compatibility

The PH10 PLUS can be used in conjunction with Renishaw’s UCC controller family, providing a comprehensive retrofit solution for all types of CMM.

Length	73 mm
Width	80 mm
Weight	730 g
Probe mounting	Autojoint (multiwire)
Head mounting	Direct to quill
Suitable controller	PHC10-3 PLUS
Repeatability of position	0.4 µm (0.00002 in) specified at a distance of 100 mm
Total number of positions	720
Maximum recommended drive torque	0.45 Nm
Maximum extension bar	300 mm (11.8 in) using PAA3 extension 450 mm (17.7 in) using PAACF special order only extension

Renishaw applies innovation to provide solutions to your problems

Renishaw is an established world leader in metrology, providing high performance, cost-effective solutions for measurement and increased productivity. A worldwide network of subsidiary companies and distributors provides exceptional service and support for its customers. Renishaw designs, develops and manufactures products which conform to ISO 9001 standards. Renishaw provides innovative and cost-effective solutions using the following products:

• Probe systems for inspection on CMMs (co-ordinate measuring machines).

• Systems for job set-up, toolsetting and inspection on machine tools.

• Scanning and digitising systems.

• Laser and automated ballbar systems for performance measurement and calibration of machines.

• Encoder systems for high accuracy position feedback.

• Spectroscopy systems for non-destructive material analysis in laboratory and process environments.

• Styli for inspection and tool setting probes.

• Customised solutions for your applications.

Relation Products