The range comprises three PH10 PLUS models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features. This enables the inspection of features at different angles without the need for frequent, time consuming stylus cluster changes. All three variants of the PH10 PLUS heads are supplied with a repeatability specification of just 0.4 µm (2σ) (specified at a distance of 100 mm), giving users improved positioning at the stylus tip.
The PH10T PLUS is similar to the PH10M PLUS, except that it features an M8 thread probe mount in place of the autojoint. All M8 threaded probes, such as TP20 and TP200, and extension bars fit directly onto the head. The PH10T PLUS is fully compatible with all of Renishaw's stylus and module change systems.
PH10T PLUS shank-mounted head with two-wired probe capability and an M8 thread
The PH10T PLUS is a motorised indexing head that mounts and re-orientates the probe repeatably to any one of 720 positions at 7.5° increments
Controlled by the PHC10-3 PLUS
All M8 thread probes can be fitted directly onto the mount of the PH10T PLUS Compatible with PEL (M8) extension bars up to 300 mm (11.81 in) long
The AM1 adjustment module (fitted between the head and the shank) corrects the alignment of the PH10T PLUS to the machine
🌎🌍🌏 V-Proud tự hào là nhà phân phối chính hãng của Renishaw tại Việt Nam. V-Proud sẵn sàng phục vụ quý khách.
Accuracy
Repeatability specification is a market leading 0.4 μm at a 100 mm radius from the centre of rotation of the axis, providing accurate positioning even when using long extensions.
Increased throughput
The PH10’s ability to index automatically reduces the number of stylus changes required, thereby increasing the throughput of your CMM. Indexing is faster than stylus changing.
Increased reach and flexibility
Extension bars up to 450 mm long, together with the full range of Renishaw autojoint and M8 probes, can be used with the appropriate head types.
Repeatable kinematic location
The PH10 PLUS uses a six point kinematic location for each of its 720 indexable positions, making its locking mechanism the most repeatable on the market.
The Renishaw autojoint
This industry standard feature allows repeatable automated probe exchange without the need for stylus requalification.
UCC compatibility
The PH10 PLUS can be used in conjunction with Renishaw’s UCC controller family, providing a comprehensive retrofit solution for all types of CMM.
|
Length |
103 mm |
|
Width |
62 mm |
|
Weight |
645 g |
|
Probe mounting |
M8 thread (2-wire) |
|
Head mounting |
Shank to suit CMM |
|
Suitable controller |
|
|
Repeatability of position |
0.4 µm (0.00002 in) specified at a distance of 100 mm |
|
Total number of positions |
720 |
|
Maximum recommended drive torque |
0.45 Nm |
|
Maximum extension bar |
300 mm (11.8 in) using PEL4 extension |
Renishaw applies innovation to provide solutions to your problems
Renishaw is an established world leader in metrology, providing high performance, cost-effective solutions for measurement and increased productivity. A worldwide network of subsidiary companies and distributors provides exceptional service and support for its customers. Renishaw designs, develops and manufactures products which conform to ISO 9001 standards. Renishaw provides innovative and cost-effective solutions using the following products:
• Probe systems for inspection on CMMs (co-ordinate measuring machines).
• Systems for job set-up, toolsetting and inspection on machine tools.
• Scanning and digitising systems.
• Laser and automated ballbar systems for performance measurement and calibration of machines.
• Encoder systems for high accuracy position feedback.
• Spectroscopy systems for non-destructive material analysis in laboratory and process environments.
• Styli for inspection and tool setting probes.
• Customised solutions for your applications.
(84) 896 555 247
Tiếng Việt
English
